Singer 14u64a user manual

Handle the foot controller with care and avoid dropping it on the fioor. Be sure not to place anything on top of it. Principal parts Preparatiorx prior to sewing Threading the machine Chain off and test sew How to adjust thread tension How to adjust stitch length How to adjust overedge seam width How to roll hem Free arm sewing tubular work Seam guide lines Edge guide Variation stitch Ornamental stitching How to replace needles How to replace stationary knife How to exchange light bulb How to adjust presser foot pressure Reasons for poor stitches and how to make adjustment Relationship between cloth, thread and needle Connect the machine plug to the electncal receptacle of your machine and the power line plug to the wall receptacle.

To run the machine and control the speed, press the speed controller. The harder you press, the faster the machine will sew. To stop the machine from sewing, remove your foot from the speed controller. Be sure not to place anything on top of It. This allmilnates the possibility of startingthe machine by accidentally pressing the speed controller.

Before cleaning your machine, disconnect the power-line plug from the socket outlet. Extend the thread guide holder as far as possible and set the thread guides so that they are located right above the spool pins.

When using a regular thread spool, fit the spool cap supplied with the machine onto the thread soooi as shown at left. Threading is diagrammed on the inner side of the looper cover and identified with colors on the various thread guides. Complain wrong Brand wrong Model non readable. This manual is related to the following products: 14U Chair, off and test sew Adjust thread tension to suit the type of material and si2e of the thread used.

The thread tension dials on this machine are a one-tum system and as the number on the thread tension dials increases, the thread tension becomes tighter. Be sure the threads are correctly threaded otherwise proper thread tension cannot be obtained See page 6.

Set each of the thread tension dials to the settings shown below and test sew. With following figure as reference, adjust the thread tension dials to obtain correct tension. Be sure the threads are correctly threaded otherwise proper thread tension cannot be ohtzined See page 6.